EN 1.4418 - X4CrNiMo16-5-1 - Martensitic Stainless Steel - Stainless steel

EN 1.4418 - X4CrNiMo16-5-1

EN 1.4418 - X4CrNiMo16-5-1 stainless steel is a martensitic stainless steel with low carbon content, providing excellent mechanical properties. Compared to other martensitic stainless steels, 1.4418 grade stainless steel boasts superior corrosion resistance, along with good weldability.

Chemical Composition	0.06C-16Cr-1.1Mo-2Ni
Physical Property	• Density: 7.7 g/cm³ • Thermal Expansion: 10.5 x10^-6/K • Modulus of Elasticity: 215 GPa • Thermal Conductivity: 15 W/m.K • Electrical Resistivity: 0.8 x10^-6 Ω .m
Stock & Dimensions	Our warehouse has a large number of stock to provide you with a variety of products in different sizes, and can also customize the size according to your needs. • Bar: 0.5~600mm Diameter • Coil: 0.5~150mm Thick • Plate: 0.5~200mm Thick • Pipe: 6~630mm External Diameter; 0.5~40mm Wall Tick • Available in specific sizes
Product Forms	We provide you with a variety of product forms, including but not limited to: • Bar/Rod • Pipe/Tube • Coil/Strip • Plate/Sheet/Circle • Wire • Fitting (Flange, Elbow, Tee...) • Customize

Essential details

Due to the corrosion resistance it shows, the 1.4418 martensitic stainless steel is suitable for use in slight to moderate corrosive media. It also shows high-abrasion corrosion resistance. This feature makes it a preferred choice for hydraulic and control system applications.

Typical Applications:

- Hydropower equipment

- Water turbine parts

- Shear pins

- Bolts

- Valves

Martensitic Stainless Steel

EN 1.4418 - X4CrNiMo16-5-1

Connect With US