AISI 632 - 15-7PH - Martensitic Stainless Steel - Stainless steel

AISI 632 - 15-7PH

15-7PH is a precipitation hardening stainless steel designed to offer superior strength and moderate corrosion resistance. This semi-austenitic steel contains chromium-nickel-molybdenum-aluminium, making it the perfect solution for applications requiring these properties.

Chemical Composition	0.1C-0.7Si-1.2Mn-0.04P-0.015S-14~16Cr-6.5~7.8Ni-2~3Mo-0.7~1.5Al
Physical Property	• Density: 7.81 g/cm³ • Tensile Strength: 900-1100 MPa • Yield Strength: 1000 MPa • Melting Point: 1350– 1450°C • Elogation: 15%
Stock & Dimensions	Our warehouse has a large number of stock to provide you with a variety of products in different sizes, and can also customize the size according to your needs. • Bar: 0.5~600mm Diameter • Coil: 0.5~150mm Thick • Plate: 0.5~200mm Thick • Pipe: 6~630mm External Diameter; 0.5~40mm Wall Tick • Available in specific sizes
Product Forms	We provide you with a variety of product forms, including but not limited to: • Bar/Rod • Pipe/Tube • Coil/Strip • Plate/Sheet/Circle • Wire • Fitting (Flange, Elbow, Tee...) • Customize

Essential details

AISI 632 - 15-7PH is a semi-austenitic precipitation hardening stainless steel. With a high strength and hardness rate and good corrosion resistance, it's a reliable and cost-effective solution for a variety of applications. In conditions TH 1050 and RH 950. it offers greater corrosion resistance than standard hardenable chromium types 400 series stainless steels.

Typical Applications:

- Springs

- Retaining rings

- Diaphragms

- Aircraft bulkheads

- Welded and brazed honeycomb paneling

- Aircraft components