UNS S32304 - EN 1.4362 - Duplex Stainless Steel - Stainless steel

1.4362 belongs to DUPLEX stainless steels, offering a much greater yield strength than austenitic stainless steels. This grade provides superior corrosion resistance, tension, and cracking resistance, as well as remarkable tensile and yield strength.

Chemical Composition	0.02C-0.1N-23Cr-4.8Ni-0.3Mo
Physical Property	• Density: 7.80 g/cc • Tensile Strength: 670 MPa • Yield Strength: 400 MPa • Modulus of Elasticity: 200 GPa • Thermal Conductivity: 15.0 W/m-K
Stock & Dimensions	Our warehouse has a large number of stock to provide you with a variety of products in different sizes, and can also customize the size according to your needs. • Bar: 0.5~600mm Diameter • Coil: 0.5~150mm Thick • Plate: 0.5~200mm Thick • Pipe: 6~630mm External Diameter; 0.5~40mm Wall Tick • Available in specific sizes
Product Forms	We provide you with a variety of product forms, including but not limited to: • Bar/Rod • Pipe/Tube • Coil/Strip • Plate/Sheet/Circle • Wire • Fitting (Flange, Elbow, Tee...) • Customize

Essential details

Stainless steel grade Duplex 2304 is a duplex stainless steel type with a structure that is a balance of ferritic and austenitic. It has high strength and toughness, resistance to stress corrosion cracking, high thermal conductivity, low thermal expansion, and easy fabrication. It is recommended that this steel is not used in areas where the steel would be exposes to temperatures over 1058°C (570°F) for prolonged periods.

Typical Applications:

- Bridges

- Storage tanks

- Water heaters

- Heat exchangers

- Pressure vessels

- Feedwater tubes

- Heat exchangers

- Flue-gas cleaning

- Seawater systems

- Desalination plants

- Parts for structural design