INCONEL 700 exhibits excellent age-hardenability and can resist both heat & corrosion. It is furthermore known for its exceptional stress-rupture characteristics. Its strength can be increased even further by a variety of heat treatment techniques and can be hardened to reach high yield strength levels. INCONEL 700 is a versatile material, making it suitable for a range of applications.
INCONEL 700 exhibits excellent age-hardenability and can resist both heat & corrosion. It is furthermore known for its exceptional stress-rupture characteristics. Its strength can be increased even further by a variety of heat treatment techniques and can be hardened to reach high yield strength levels. INCONEL 700 is a versatile material, making it suitable for a range of applications.
| Chemical Composition | 3Al-15Cr-28.5Co-0.7Fe-3.75Mo-46Ni-2.2Ti |
| Physical Property | • Density: 7.7-8.03 kg/m³
• Tensile Strength: 1158 MPa • Yield Strength: 1034 MPa • Melting Point: 1370-1400°C • Modulus of Elasticity: 190-210 GPa |
| Stock & Dimensions | Our warehouse has a large number of stock to provide you with a variety of products in different sizes, and can also customize the size according to your needs. • Bar: 0.5~600mm Diameter • Coil: 0.5~150mm Thick • Plate: 0.5~200mm Thick • Pipe: 6~630mm External Diameter; 0.5~40mm Wall Tick • Available in specific sizes |
| Product Forms | We provide you with a variety of product forms, including but not limited to: • Bar/Rod • Pipe/Tube • Coil/Strip • Plate/Sheet/Circle • Wire • Fitting (Flange, Elbow, Tee...) • Customize |
Applications:
This superalloy is widely used to produce the high temperature components for gas turbine in the field of aviationnaval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disccombustor, and also production of eneray conversion devices, such as aerospace crat, rocket motor, nucleaieactor, petrochemical equipments, coaly transforming and so on.
The alloy is usually produced by AOD /VDVIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels.
